PT.INDIRA DWI MITRA- SPECIALIST:
Oil Thermal Boilers ( Thermal Oil Heater)
idm Thermal is a heat generator by using oil as a heating medium.Thermal idm can be operated up to a temperature of 350 C with very low pressure (curfrom 5 bars), compared to using a steam boiler with the same operating temperature mathe required pressure exceeds 90 bar.idm Thermal can be used in industries that require heat.idm Thermal is designed with multi tubular consent coils, vertical execution (standing position) d
Horizontal execution. Multi tubular coils make heat transfer in the coil very tightbalanced and perfect, so it is more guaranteed to avoid the risk of burning filming oil bcause crustExtra wide combustion chamber surface to avoid flames that can damage the surfacecoils.
Does not require a water treatment plant and does not require chemical dosing in operation making it more efficient in operation.The use of mineral oil as a transfer medium does not cause dirt deposits, scavenging, no
corrosive and stable at operating temperatures.IDM Thermal is assembled from a series of imported component materials that are known to be reliablevery high quality. Each component already has a representative in Jakarta and is easily available in the market so there is no concern about the spare parts.Each manufacturing process is carried out according to strict standard procedures and Quality Control, so that it becomes idm Thermal as a sturdy and reliable Oil heater.
Perfect handling and supported by good service and supported by professional technicians is a guarantee of the quality of this product. Free of import procedures, the delivery schedule can be adjusted to the customer’s needs with the production process system integrated. Guaranteed after sales, free commissioning and start up. Idm Thermal construction The thermal IDM body is the core of oil heater. The inside is made a multi helical coil system and at the coil end it is put together in two headers as hot oil inlet and outlet. Thermal coil idm construction is made using international standard boiler pipes which are rolled by pipe bending mechine without using heating so as not to damage the composition of the chemical structure of the pipe material. On the outside of the Thermal IDM body is insulated using rockwool to increase efficiency and wipe with a plate as a wall on the outside. IDM Thermal is equipped with a control panel that is useful to make it easier for operators to operate idm Thermal.
Expantion Tank is a combination of Deaerator tanks, buffer tanks and Expantion tanks. With the combination u
between these three tanks the uppermost layer of oil associated with the air will always be cooler so the chance of oil oxidation is greatly reduced. Expantion tanks function to accommodate the expansion of heating fluid, removing the air that is confined to the Install and prevent capitation in the circulation pump.
Thermal Oil Heater
Circulation pump serves to drain heating fluid in the installation. Size
and the pump capacity is adjusted to the thermal IDM design.
Pump capacity determines the shape of the flow of heating fluid inside the coil. Aliran dida
thermal idm must be turbolent, this is useful for avoiding liquid damage
heater and coil in thermal idm body.
The circulation pump can operate up to 350 C.
The control panel is the center of the Thermal IDM controller. This panel is available
some switches and lights to operate the burner and circulating pump
In the control panel there are also instruments and indicators that function for
regulate, monitor and control thermal idm.
The control panel is designed in such a way as to facilitate the operator inside
operate the Thermal IDM
Digital temperature controls
Flow controls switches
Automatic burner controls
Chimney temperature control
Pilot lamp indicator
How it Works Thermal Idm
All installations must be filled with heating fluid to the control level of the expantion tank. The circulation pump will drain the heating liquid from the expantion to the idm thermal body and then process and recover
again to the expantion tank. After the circulation flow of the heating fluid is stable, the burner will light up and burn the coil inside the thermal idm body so that the heating liquid becomes hot and hot is passed to the process.
After the desired temperature is reached, the burner will automatically turn off and will turn on again after temperature down.